|
3. 6.4–6.7 GHz, 1,500 W Pulsed Solid-State Power Amplifier
3. 6.4–6.7 GHz, 1,500 W Pulsed Solid-State Power AmplifierHigh-Power C-Band / Extended C-Band Pulsed GaN Amplifier A high-gain pulsed solid-state power amplifier using GaN RF devices, with integrated control, monitoring and protection functions. It is specified for high-power pulsed RF applications and radar-system integration. Key FeaturesOperating frequency: 6.4–6.7 GHz Peak pulsed output power: 1,500 W typical; 1,250 W minimum Typical power gain: 62 dB Pulse width: 0.5–100 μs Typical duty cycle: 10% 48 V DC operation Integrated control, monitoring and protection
Electrical Specifications| Parameter | Min. | Typ. | Max. | Unit / Conditions |
|---|
| Operating frequency | 6.4 | — | 6.7 | GHz | | Peak output power @ Pin = 0 dBm | 1,250 | 1,500 | — | W | | Power gain | — | 62 | — | dB | | Pulse width | 0.5 | — | 100 | μs | | Duty cycle | 7 | 10 | 15 | % | | Input power for rated Psat | −2 | 0 | +2 | dBm | | RF input power range | −5 | — | +10 | dBm | | Second harmonic @ Pin = 0 dBm | — | −40 | −30 | dBc | | Spurious signals @ Pin = 0 dBm | — | −60 | −55 | dBc | | Pulse rise/fall time (10–90%) | — | 50 | — | ns | | Power droop (PW = 100 μs, DC = 10%) | — | 0.5 | 0.8 | dB | | Noise power when RF is switched off | — | — | −100 | dBm/Hz max. | | Operating voltage | 45 | 48 | 51 | V DC | | Average current consumption | — | 13 | 15 | A @ 1,250–1,500 W peak, 10% DC | | Power-added efficiency (PAE) | — | 25 | — | % | | Enable switching time @ 1 kHz TTL | — | 1 | 1.2 | μs | | RF on/off switching time @ 1 kHz TTL | — | 50 | 150 | ns | | Amplitude flatness within any 10 MHz band | — | ±0.1 | ±0.2 | dB; PW = 100 μs, DC = 10% |
Functional CharacteristicsTest ConditionsUnless otherwise stated: T = 25°C; DC supply = 48 V; pulse width = 100 μs; duty cycle = 10%; load VSWR ≤1.3.
|
|