扫码咨询

新闻动态

首页 >> 新闻动态 >> 5. 7–13 GHz, 100 W RF Power Amplifier
详细内容

5. 7–13 GHz, 100 W RF Power Amplifier

5. 7–13 GHz, 100 W RF Power Amplifier

Wideband 7–13 GHz Solid-State Power Amplifier

A wideband RF power amplifier covering 7–13 GHz, supporting CW, pulsed and RF-modulated signals. The compact module features integrated enable control and protection functions.

Key Features

  • Wide operating frequency range: 7–13 GHz

  • Typical RF output power: 50 dBm (100 W)

  • Typical power gain: 50 dB

  • Typical efficiency: 28%

  • CW, pulsed and RF-modulated signal compatibility

  • Over-temperature, RF overdrive and reverse-polarity protection

  • IPX5 protection rating

Technical Specifications

ParameterSpecification
Operating frequency7–13 GHz
Typical RF power gain50 dB
RF power gain flatness±2 dB
Typical RF output power50 dBm (100 W)
Supported signal modesCW, pulsed and various RF-modulated signals
Operating voltage+28 V DC
Typical efficiency28%
Output spurious level< −60 dBc
Input VSWR≤ 1.5:1
Weight< 1.2 kg
Operating temperature−40°C to +55°C
Ingress protectionIPX5

Control and Protection Functions

FunctionDescription
PA enable / switch controlManual button or PAEN control. TTL high: PA ON; TTL low: PA OFF. Default state: OFF.
Over-temperature protectionAutomatic protection and shutdown when the internal temperature exceeds the limit.
RF overdrive protectionDesigned to withstand RF input power up to +10 dBm, as stated in the source.
Enable voltage rangeHigh level: +5 V to +28 V; low level: below 1 V.
Reverse-polarity protectionProtection against damage caused by reverse DC power connection.

Typical Applications

  • Wideband microwave transmitters

  • RF subsystem integration

  • Test and measurement equipment

  • Radar and communication system development

客服中心
联系方式
18688706870
0755-29210759
- 销售
微信18688706870
seo seo