扫码咨询

新闻动态

首页 >> 新闻动态 >> Huashi Self-developed Ku-Band UC/DC Converter Module: 14.0~14.5GHz TX / 10.7~12.75GHz RX, 30dB Gain
详细内容

Huashi Self-developed Ku-Band UC/DC Converter Module: 14.0~14.5GHz TX / 10.7~12.75GHz RX, 30dB Gain

The Ku-band UC/DC converter module, independently developed, manufactured and supplied by Shenzhen Huashi Digital Tech Co., Ltd.(深圳市华视数码科技有限公司), integrates a 14.0~14.5 GHz up-converter and a 10.7~12.75 GHz down-converter in a single approx. 200 g housing. Working from a 950~2150 MHz IF with 30 dB gain and 0.5 dB gain stepping, automatic internal/external reference switching and serial-port control from the antenna control unit (ACU), the module gives VSAT terminal and satcom system builders a compact bidirectional RF front end that replaces two separate boxes. It is now in volume supply.

1. One Module, Two Directions: Integrated Up-Conversion and Down-Conversion

On the transmit side, the up-converter accepts a 950~1450 MHz (default) / 950~1700 MHz IF and delivers 14.0~14.5 GHz / 13.75~14.5 GHz at the RF output, with an LO of 13.05 GHz / 12.8 GHz (12.8 GHz by default at power-up when no LO is configured). On the receive side, the down-converter covers 10.7~11.7 GHz, 11.7~12.75 GHz and 12.25~12.75 GHz RF inputs and converts them to a 950~1950 MHz / 1100~2150 MHz / 950~1450 MHz IF, using switchable LO frequencies of 9.75 GHz, 10.6 GHz and 11.3 GHz — the standard universal Ku-band LO plan, so existing LNB-based system designs can be kept unchanged.

LO frequency changes are made through frequency-switching commands sent over the serial port (see the communication protocol), which means one hardware build can serve multiple channel plans and regions without re-tuning.

2. Reference and Power Architecture Built for Field Integration

The module supports simultaneous internal-reference and external-reference operation for both transmit and receive channels, with automatic adaptation. When no external reference input is present, both channels run on the internal reference by default; once an external 10 MHz reference is detected on the transmit channel, logic control automatically switches both channels to external-reference mode. The incoming external signal is filtered and amplified before feeding the frequency synthesis unit: one path is filtered and supplied directly as the reference for the receive converter, while the other passes through an amplification and filtering chain to provide the reference for the transmit converter. Frequency stability is ≤±1 ppm; the external reference input accepts 10 MHz at -5~+5 dBm into 50Ω.

Power is taken through low-frequency wiring from the ACU: the power module accepts 9~24 VDC (current ≤0.4 A) and generates the internal working rails, so no separate RF-site power supply is needed. IFIN1 supports 10 MHz reference feed-in as standard, and a custom version with 10 MHz feed-in on both IF input ports is available on request. All configured parameters are retained after power-off.

3. Key Technical Specifications

Item Up-conversion Down-conversion
RF frequency14.0~14.5 GHz / 13.75~14.5 GHz10.7~11.7 / 11.7~12.75 / 12.25~12.75 GHz
IF frequency950~1450 / 950~1700 MHz950~1950 / 1100~2150 / 950~1450 MHz
LO frequency13.05 / 12.8 GHz (default at power-up)9.75 / 10.6 / 11.3 GHz
Gain (customizable)30 dB, adjustable over a 30 dB range, 0.5 dB step30 dB, 0.5 dB step
P1dB output power≥16 dBm≥0 dBm
Amplitude-frequency response±1.2 dB @ 350 MHz; ≤4 dB p-p over the full band
Gain variation with temperature≤3 dB over the operating temperature range
Noise figure—≤5 dB
Image rejection—≤-35 dBc
Out-of-band rejection≤-55 dBc @ 10.7~12.75 GHz≤-30 dBc @ 13.7~14.5 GHz
Spurious emissionIn-band ≤-55 dBc
Third-order intermodulation (IMD3)≤-30 dBc @ P1dB back-off 3 dB—
Phase noise (dBc/Hz)≤-60 @ 100 Hz; ≤-70 @ 1 kHz; ≤-80 @ 10 kHz; ≤-90 @ 100 kHz; ≤-100 @ 1 MHz
Frequency stability≤±1 ppm; external reference input 10 MHz, -5~+5 dBm / 50Ω
Supply voltage / currentDC 9~24 V, current ≤0.4 A
Port VSWRRF port 1.5:1; IF port 1.2:1
InterfacesRFOUT / RFIN: SMA-50K; IFIN1 / IFIN2 / IFOUT1 / IFOUT2: MCX-50K
Operating / storage temperature-40°C~+65°C (operating); -45°C~+85°C (storage)
Dimensions / weightCompact housing, approx. 200 g (outline drawing available on request)

Note: figures above are for the standard build; frequency plans, gain, interfaces and mechanical outlines can be customized per project.

4. Intelligent Control: Automatic TX Detection and ACU Status Reporting

On-board logic control handles the day-to-day operation of the module:

  • Gain and LO frequency of both receive and transmit channels are configurable by command;
  • internal/external reference mode is identified and switched automatically;
  • the module receives commands from the ACU and reports its status back to the ACU;
  • temperature sensor acquisition is supported for condition monitoring;
  • the transmit IF input signal is detected automatically: the transmit link turns on by protocol when a transmit IF signal is present and turns off when the signal disappears;
  • IFIN1 supports 10 MHz reference feed-in as standard; a dual-IF-input version with 10 MHz feed-in is available as a custom build.

Together with the dual-IF architecture — two IF input ports for the up-converter chosen by an SPDT switch (one path with reference extraction), and two IF output ports on the down-converter formed by an internal power divider — the module slots cleanly into redundant and multi-chain terminal architectures.

5. Interfaces and Environmental Performance

RF connectivity uses industry-standard connectors: RFOUT (RF output) and RFIN (RF input) on SMA-50K, with all four IF ports (IFIN1, IFIN2, IFOUT1, IFOUT2) on MCX-50K. Port VSWR is held at 1.5:1 on the RF ports and 1.2:1 on the IF ports, protecting overall link budget in long IF runs.

The module is rated for outdoor and transportable applications: -40°C~+65°C operating and -45°C~+85°C storage, with gain variation over the full temperature range kept within 3 dB. Combined with the 9~24 VDC wide-range input, it tolerates unstable field power and wide climate conditions typical of satcom terminals, flyaway antennas and vehicle-mounted stations.

6. Supply and Customization

The Ku-band UC/DC converter module is now in volume supply. Shenzhen Huashi Digital Tech Co., Ltd.(深圳市华视数码科技有限公司)maintains full in-house research, manufacturing and sales capabilities for RF, microwave and satellite communication modules, covering the complete chain from frequency-plan design and synthesis, through production and test, to delivery and after-sales support. Besides the standard configuration described above, gain, LO plan, IF plan, reference feed-in arrangement, connectors and mechanical dimensions can all be customized to match your system architecture.

选型与报价请联系:销售部 18688706870,官网:www.szwisi.com。 For inquiries and quotation, please contact the sales department at 18688706870, Shenzhen Huashi Digital Tech Co., Ltd. — www.szwisi.com.

客服中心
联系方式
18688706870
0755-29210759
- 销售
微信18688706870
seo seo