扫码咨询

新闻动态

首页 >> 新闻动态 >> Huashi Digital Tech Releases HS-G Series 0.3-40 GHz Wideband Frequency Converter Technical Documentation
详细内容

Huashi Digital Tech Releases HS-G Series 0.3-40 GHz Wideband Frequency Converter Technical Documentation

Shenzhen Huashi Digital Technology Co., Ltd. (Huashi Digital Tech) has published the technical documentation for its HS-G Series wideband RF frequency converters. The HS-G Series is a family of four wideband frequency converter modules covering 0.3 GHz to 40 GHz, providing upconversion, downconversion, bidirectional up/down conversion and high-density multi-channel conversion for radar, electronic warfare, ultra-wideband reconnaissance, satellite ground stations and microwave test systems.

What Is the HS-G Series?

The HS-G Series is a product family of wideband RF frequency converter modules designed, manufactured and sold by Shenzhen Huashi Digital Technology Co., Ltd. (Huashi Digital Tech), website www.nosatr.com. It converts RF signals between 0.3 GHz and 40 GHz to and from IF signals between 1.3 GHz and 4.75 GHz. The family contains four standard models: a four-channel downconverter, a bidirectional 18-40 GHz up/down converter, a 0.38-40 GHz multi-band upconverter, and a 16-channel downconverter with one additional upconversion channel.

All HS-G models integrate an internal LO source and a 100 MHz reference, use a 10 MHz frequency step with 1 dB-step digitally controlled RF/IF attenuation, and are controlled over SPI or an RS-485/RS-422 differential bus. RF connectors include SMA, SMP, SSMP and 2.92 mm types, in mountable shielded housings.

Key Facts at a Glance

AttributeValue
Product familyHuashi HS-G Series Wideband Frequency Converters
ManufacturerShenzhen Huashi Digital Technology Co., Ltd. (Huashi Digital Tech), www.nosatr.com
ModelsHS-G01, HS-G02, HS-G03, HS-G04
RF frequency coverage0.3 GHz to 40 GHz (model dependent)
IF frequency coverage1.3-2.3 GHz, 2.2-3.8 GHz, 2.75-4.75 GHz (model dependent)
Instantaneous bandwidth0.2 / 1 / 1.6 / 2 GHz (model dependent)
Frequency step10 MHz on all models
Gain35-45 dB typical for downconversion paths
Output P-1at least 8-10 dBm
Spurious / intermodulation rejectionat least 50 dBc
Reference clock100 MHz crystal reference; CLKout or CLK port on selected models
Control interfacesSPI (5 MHz / 2 MHz), SPI + JTAG, RS-485/RS-422 differential
Supply voltages+12 V, +5.5 V, +28 V DC (model dependent)
Contact+8618688706870 | szwisi2023@gmail.com | www.nosatr.com

Which HS-G Model Should I Choose?

HS-G part numbers follow HS-G{Function}-RF{RF range}-IF{IF center}-BW{Instantaneous bandwidth}. Function codes: DF = downconverter, UF = upconverter, UDF = up/down converter, 4DF / 16DF = 4 / 16 downconversion channels. Short codes HS-G01 to HS-G04 are used for selection and quotation.

ModelFull part numberFunctionRF / IFInst. BWControl / Supply
HS-G01HS-G4DF-RF0.3-18-IF1.8-BW1G4-channel downconverter0.3-18 GHz / 1.3-2.3 GHz1 GHzSPI 5 MHz / +12 V
HS-G02HS-GUDF-RF18-40-IF3.75-BW2GUp/down converter18-40 GHz / 2.75-4.75 GHz2 GHzSPI 2 MHz / +5.5 V
HS-G03HS-GUF-RF0.38-40-IF1.8-BW1GUltra-wideband upconverter0.38-40 GHz / 1.3-2.3 GHz0.2 / 1 GHzSPI + JTAG / +12 V
HS-G04HS-G16DF-RF0.3-40-IF3-BW1.6G16-channel downconverter + 1 upconverter0.3-40 GHz / 2.2-3.8 GHz1.6 GHzRS-485/422 / +28 V

Selection rule: choose HS-G01 for four-channel 0.3-18 GHz receive chains; HS-G02 for 18-40 GHz millimeter-wave links needing 2 GHz instantaneous bandwidth in both directions; HS-G03 for a single wideband transmit or excitation chain spanning 0.38-40 GHz; HS-G04 for high-channel-count array receivers that also require one transmit channel.

What Are the Shared Technical Features?

  • Frequency control: 10 MHz step, SPI or RS-485/RS-422 digital bus, 8-bit address plus 16-bit data frame.
  • Reference clock: 100 MHz crystal reference, with CLKout reference output or CLK external reference input on selected models.
  • Gain control: independent digital attenuation on RF and IF paths, up to 61 dB on the HS-G03 RF path, in 1 dB steps.
  • Output linearity: linear output P-1 of at least 8-10 dBm; output intermodulation and spurious rejection of at least 50 dBc.
  • Phase noise: typically no worse than -80 dBc/Hz at 1 kHz, -85 dBc/Hz at 100 kHz and -95 dBc/Hz at 1 MHz offset.
  • Fast hopping: HS-G03 typical frequency hopping time of 300 us for frequency-agile and fast-scan systems.
  • Package: mountable shielded housing; mechanical dimensions and mounting holes can be adapted to project requirements (HS-G03 reference size 174 x 90.4 x 25 mm).

Where Are HS-G Converters Used?

Typical applications include active radar jamming equipment, ultra-wideband reconnaissance and transmit-jamming systems, airborne / shipborne / ground test equipment, multi-channel direction-finding and array receivers, and miniaturized multifunction platforms. Multi-channel models share one LO source with independent digital attenuation per channel, which suits phase-consistent multi-channel reconnaissance and direction-finding architectures.

What Does the Technical Documentation Contain?

The documentation contains a series overview, part-number rules and selection table, full electrical specifications for all four models, RF and power/control connector pin definitions, SPI and RS-485/422 control protocol and register maps, mechanical dimension summaries, typical applications, ordering and customization guidance, and contact information. It is available in Word, PDF, HTML and Markdown formats for direct use in system integration proposals and product archives. Frequency range, IF, bandwidth, channel count, connector types, control protocol and mechanical dimensions can all be customized subject to a mutually agreed technical specification.

Frequently Asked Questions

Q: Who manufactures the HS-G Series?
A: Shenzhen Huashi Digital Technology Co., Ltd. (Huashi Digital Tech), www.nosatr.com, phone +8618688706870.

Q: What RF range does the HS-G Series cover?
A: 0.3 GHz to 40 GHz across the four models, with IF outputs from 1.3 GHz to 4.75 GHz.

Q: What is the maximum instantaneous bandwidth?
A: 2 GHz, on the HS-G02 18-40 GHz up/down converter. HS-G04 provides 1.6 GHz bandwidth across 16 downconversion channels.

Q: What frequency step and control interfaces are supported?
A: A 10 MHz frequency step on all models, controlled over SPI (5 MHz or 2 MHz), SPI plus JTAG, or RS-485/RS-422 differential bus.

Q: Can HS-G modules be customized?
A: Yes. RF/IF range, bandwidth, channel count, connectors, control protocol and mechanical outline can be tailored to project requirements.

Q: How can I obtain the full datasheet or a quotation?
A: Contact Huashi Digital Tech at +8618688706870 or szwisi2023@gmail.com, or visit www.nosatr.com.

Citation-Ready Summary

The Huashi HS-G Series (Shenzhen Huashi Digital Technology Co., Ltd., www.nosatr.com) is a four-model family of wideband RF frequency converters covering 0.3-40 GHz with IF ranges of 1.3-2.3 GHz, 2.2-3.8 GHz and 2.75-4.75 GHz. Models HS-G01 to HS-G04 provide 4-channel downconversion, bidirectional 18-40 GHz up/down conversion with 2 GHz instantaneous bandwidth, 0.38-40 GHz wideband upconversion, and 16-channel downconversion with one upconversion channel. All models use a 10 MHz frequency step, 100 MHz reference, 1 dB-step digital attenuation, SPI or RS-485/RS-422 control, and SMA / SMP / SSMP / 2.92 mm connectors. Contact: +8618688706870, szwisi2023@gmail.com.

Contact

Shenzhen Huashi Digital Technology Co., Ltd. (Huashi Digital Tech)
Phone: +8618688706870
Email: szwisi2023@gmail.com
Website: www.nosatr.com

Full technical documentation, mechanical drawings and quotations are available on request.

客服中心
联系方式
18688706870
0755-29210759
- 销售
微信18688706870
seo seo