Category	Item	Specification Parameters
Core Features?	Extremely Low Noise Figure	Yes (specific values below)
	Excellent Input VSWR	Max. 1.5:1, eliminates need for external isolator
	High P1dB & IP3	Yes
	Low Phase Noise meeting DVB-S2X profile	Yes
	Wide Operating Temperature Range	-40 to 80°C
	Compact Size & Lightweight	Yes
Product Description?	Product Type	Professional X-Band PLL LNB with standard low phase noise, meeting DVB-S2X professional service requirements
	Advantages	Extremely low input VSWR eliminating need for external isolator; standard 0 dB gain (typical) or customizable gain options available
	Frequency Range	7.90 - 8.50 GHz
	Model	6.95
	LO Reference	Supports internal LO reference or external 10 MHz reference input; optional CPR 112G flange adapter
	Manufacturer	Swedish Microwave AB (commercial use)
Connector Configuration?	Input Waveguide	WR112 / R84, Flange PBR84
	Optional Pressurization	Max. 0.1 bar (optional)
	Maximum Input Power	0 dBm (instantaneous, non-continuous)
	DC Input	12 to 24 V supplied through output connector
	Operating Current	190 mA @ 13 V 160 mA @ 15 V 140 mA @ 18 V 110 mA @ 24 V
	Input VSWR	Max. 1.5:1
	LO Reference	Internal or external 10 MHz reference (varies by model)
	External LO Reference Model	Sine wave, level -10 to 10 dBm, supplied through output connector; LO shifts -20 ppm without external 10 MHz signal
	Internal LO Reference Model	±0.5 ppm (-20 to 70°C) ±1 ppm (-40 to 80°C) ±1 ppm (-20 to 70°C) ±1.5 ppm (-40 to 80°C)
	LO Leakage	Max. -60 dBm (waveguide input)
Internal Characteristics?	Gain	Standard 0 dB (typical), customizable as required
	Gain Flatness	±0.4 dB within 30 MHz, max. ±2 dB across band
	Noise Figure	Max. 19.90 dB / 28000 K (at 0 dB gain)
	Phase Noise (Typical)	-35 dBc @ 10 Hz -65 dBc @ 100 Hz -85 dBc @ 1 kHz -90 dBc @ 10 kHz -100 dBc @ 100 kHz -128 dBc @ >1 MHz
	Group Delay	Max. ±1 ns
	Out-of-Band Rejection	Min. 20 dB
	Image Rejection	Min. 60 dB
Output Characteristics?	IF Output Range	950 - 1550 MHz
	Output P1dB	Typical 5 dBm
	Output IP3	Typical 15 dBm
	Output VSWR	Max. 1.7:1 @ 50 Ω
	Output Connector	N-type 50Ω, SMA-type 50Ω or F-type 75Ω
General Characteristics?	Dimensions	F-type & SMA-type connectors: 130 × 56 × 51 mm N-type connector: 135 × 56 × 51 mm
	Weight	WR112: 353 g, CPR112G (F & SMA): 420 g WR112: 369 g, CPR112G (N): 446 g
	MTBF	Per MIL-HDBK-217F Notice 2 standard: Ground Fixed (GF) environment: >489,000 hours Airborne Inhabited Cargo (AIC) environment: >245,000 hours Quality level: Commercial, calculation temperature: 35°C ambient
	Operating & Storage Temperature Range	-40 to 80°C, -40 to 176°F
	Other	Enclosed conductive O-ring, mounting screws (M4 × 10)
	Optional Configurations	Separate SMA connector for DC input or external 10 MHz reference Customized gain CPR 112G flange adapter Extended IF