Item	Parameters	Remarks	Notes
Working Frequency Tx	17.7 GHz ~ 21.2 GHz	-	-
Working Frequency Rx	27.5 GHz ~ 31 GHz	-	-
Beams Tx	1	Simultaneous Tx/Rx supported	-
Beams Rx	2	-	-
EIRP	≥ 36 dBW @ 29.5 GHz	Normal direction	-
G/T	≥ 3 dB/K @ 19.45 GHz	Normal direction	-
Scanning Range Azimuth	0° ~ 360°	-	-
Scanning Range Off-axis	± 70°	-	-
Polarization	Circular Polarization	-	-
Power Consumption	≤ 550W	-	-
Power Supply	DC 24V	-	-
Dimensions	354 mm × 354 mm × 118 mm	Connector excluded	-
Weight	20 kg	-	-
IF Interface	TNC Jack / TNC Female / TNC	-	-
Control Interface	MDM-25S / Micro-D 25-pin / J30JY-25ZKP	-	-
Power Interface	MDM-40S / Micro-D 40-pin / J30J04P040PCOOCOL00	-	-
Inertial Navigation Interface	MDM-25S / Micro-D 25-pin / J30JY-25ZKP	-	-

Glossary AOB: All-in-One Board — a fully integrated architecture combining TR, waveform control, and power management on a single board. Conformal Design: Antenna array shaped to match the curved surface of an airborne platform (e.g., aircraft fuselage), minimizing aerodynamic drag. EIRP: Effective Isotropic Radiated Power — the power transmitted by an isotropic antenna to produce the same signal strength. G/T: Figure of Merit — ratio of antenna gain to system noise temperature, indicating receive performance. Circular Polarization: Polarization where the electric field vector rotates in a circle; includes RHCP (right-hand) and LHCP (left-hand). TNC: Threaded Neill-Concelman connector — a threaded RF connector rated up to 18 GHz (some variants higher). Micro-D: A miniature D-sub connector series widely used in aerospace and military applications. MDM: Microminiature D connector series (e.g., MDM-25S = 25-pin socket), conforming to MIL-DTL-83513. J30JY: Chinese national defense standard (GJB) micro rectangular connector series with latching mechanism. Inertial Navigation Interface: Connection to an INS (Inertial Navigation System) providing real-time attitude data for beam pointing correction during flight.