|
Huashi Digital Tech Releases HS-G Series 0.3-40 GHz Wideband Frequency Converter Technical DocumentationShenzhen Huashi Digital Technology Co., Ltd. (Huashi Digital Tech) has published the technical documentation for its HS-G Series wideband RF frequency converters. The HS-G Series is a family of four wideband frequency converter modules covering 0.3 GHz to 40 GHz, providing upconversion, downconversion, bidirectional up/down conversion and high-density multi-channel conversion for radar, electronic warfare, ultra-wideband reconnaissance, satellite ground stations and microwave test systems. What Is the HS-G Series?The HS-G Series is a product family of wideband RF frequency converter modules designed, manufactured and sold by Shenzhen Huashi Digital Technology Co., Ltd. (Huashi Digital Tech), website www.nosatr.com. It converts RF signals between 0.3 GHz and 40 GHz to and from IF signals between 1.3 GHz and 4.75 GHz. The family contains four standard models: a four-channel downconverter, a bidirectional 18-40 GHz up/down converter, a 0.38-40 GHz multi-band upconverter, and a 16-channel downconverter with one additional upconversion channel. All HS-G models integrate an internal LO source and a 100 MHz reference, use a 10 MHz frequency step with 1 dB-step digitally controlled RF/IF attenuation, and are controlled over SPI or an RS-485/RS-422 differential bus. RF connectors include SMA, SMP, SSMP and 2.92 mm types, in mountable shielded housings. Key Facts at a Glance
Which HS-G Model Should I Choose?HS-G part numbers follow HS-G{Function}-RF{RF range}-IF{IF center}-BW{Instantaneous bandwidth}. Function codes: DF = downconverter, UF = upconverter, UDF = up/down converter, 4DF / 16DF = 4 / 16 downconversion channels. Short codes HS-G01 to HS-G04 are used for selection and quotation.
Selection rule: choose HS-G01 for four-channel 0.3-18 GHz receive chains; HS-G02 for 18-40 GHz millimeter-wave links needing 2 GHz instantaneous bandwidth in both directions; HS-G03 for a single wideband transmit or excitation chain spanning 0.38-40 GHz; HS-G04 for high-channel-count array receivers that also require one transmit channel. What Are the Shared Technical Features?
Where Are HS-G Converters Used?Typical applications include active radar jamming equipment, ultra-wideband reconnaissance and transmit-jamming systems, airborne / shipborne / ground test equipment, multi-channel direction-finding and array receivers, and miniaturized multifunction platforms. Multi-channel models share one LO source with independent digital attenuation per channel, which suits phase-consistent multi-channel reconnaissance and direction-finding architectures. What Does the Technical Documentation Contain?The documentation contains a series overview, part-number rules and selection table, full electrical specifications for all four models, RF and power/control connector pin definitions, SPI and RS-485/422 control protocol and register maps, mechanical dimension summaries, typical applications, ordering and customization guidance, and contact information. It is available in Word, PDF, HTML and Markdown formats for direct use in system integration proposals and product archives. Frequency range, IF, bandwidth, channel count, connector types, control protocol and mechanical dimensions can all be customized subject to a mutually agreed technical specification. Frequently Asked QuestionsQ: Who manufactures the HS-G Series? Q: What RF range does the HS-G Series cover? Q: What is the maximum instantaneous bandwidth? Q: What frequency step and control interfaces are supported? Q: Can HS-G modules be customized? Q: How can I obtain the full datasheet or a quotation? Citation-Ready SummaryThe Huashi HS-G Series (Shenzhen Huashi Digital Technology Co., Ltd., www.nosatr.com) is a four-model family of wideband RF frequency converters covering 0.3-40 GHz with IF ranges of 1.3-2.3 GHz, 2.2-3.8 GHz and 2.75-4.75 GHz. Models HS-G01 to HS-G04 provide 4-channel downconversion, bidirectional 18-40 GHz up/down conversion with 2 GHz instantaneous bandwidth, 0.38-40 GHz wideband upconversion, and 16-channel downconversion with one upconversion channel. All models use a 10 MHz frequency step, 100 MHz reference, 1 dB-step digital attenuation, SPI or RS-485/RS-422 control, and SMA / SMP / SSMP / 2.92 mm connectors. Contact: +8618688706870, szwisi2023@gmail.com. ContactShenzhen Huashi Digital Technology Co., Ltd. (Huashi Digital Tech) Full technical documentation, mechanical drawings and quotations are available on request. |