扫码咨询

新闻动态

首页 >> 新闻动态 >> HS-G04 0.3-40 GHz 16-Channel Downconverter with RS-485 Control | Huashi Digital Tech
详细内容

HS-G04 0.3-40 GHz 16-Channel Downconverter with RS-485 Control | Huashi Digital Tech

HS-G04 is a 0.3-40 GHz 16-channel downconverter with one additional upconversion channel, manufactured by Shenzhen Huashi Digital Technology Co., Ltd. (Huashi Digital Tech). It converts sixteen 0.3-40 GHz RF inputs to 2.2-3.8 GHz IF outputs with 1.6 GHz instantaneous bandwidth, and is controlled over an RS-485/RS-422 differential bus from a +28 V supply. It is one of four models in the Huashi HS-G Series wideband frequency converters.

What Is the HS-G04 and What Does It Do?

The HS-G04 (full part number HS-G16DF-RF0.3-40-IF3-BW1.6G) integrates an LO source, 16 downconversion channels, one upconversion channel, a power/control board and a crystal reference circuit. It downconverts 0.3-40 GHz RF to 2.2-3.8 GHz IF and upconverts 2.2-3.8 GHz IF back to 0.3-40 GHz RF, with 1.6 GHz instantaneous bandwidth. All channels share a common LO source, making it suitable for high-channel-count phased arrays, multi-channel direction finding and coherent wideband receivers. Control uses an RS-485/RS-422 differential bus with a 10 MHz frequency step.

Key Facts at a Glance

AttributeValue
Model / short codeHS-G04
Full part numberHS-G16DF-RF0.3-40-IF3-BW1.6G
ManufacturerShenzhen Huashi Digital Technology Co., Ltd. (Huashi Digital Tech), www.nosatr.com
Function16-channel downconverter plus 1 upconversion channel
RF frequency range0.3-40 GHz
IF frequency range2.2-3.8 GHz
Instantaneous bandwidth1.6 GHz
Downconversion gainat least 45 dB at Pin = -45 dBm
Frequency step10 MHz
Control interfaceRS-485 protocol over RS-422 physical interface, differential bus
Supply+28 V DC
Connectors2.92 mm (RF), SMA (IF)
Front panelapprox. 380 x 80 mm

Downconversion Electrical Specifications

ParameterSpecification
RF input frequency0.3-40 GHz
IF output frequency2.2-3.8 GHz
Gainat least 45 dB at Pin = -45 dBm
Instantaneous bandwidth1.6 GHz
In-band flatnesswithin +/- 2.5 dB
Maximum input power before damage2 W CW
Noise figureno more than 9 dB
Frequency step10 MHz
RF / IF attenuation31 dB range, 1 dB step
Linear output P-1at least 8 dBm
Intermodulation and spurious rejectionat least 50 dBc at Pin = -45 dBm
Phase noise at 18 GHz-80 dBc/Hz at 1 kHz, -80 at 10 kHz, -85 at 100 kHz, -95 at 1 MHz offsets or better

Upconversion Electrical Specifications

ParameterSpecification
RF output frequency0.3-40 GHz
IF input frequency2.2-3.8 GHz
Output powerat least 8 dBm at Pin = -10 dBm
Instantaneous bandwidth1.6 GHz
Frequency step10 MHz
In-band flatnesswithin +/- 2.5 dB
RF / IF attenuation31 dB range, 1 dB step
Linear output P-1at least 8 dBm
Output harmonic rejectionat least 20 dBc at Pin = -10 dBm
Intermodulation and spurious rejectionat least 50 dBc at Pin = -45 dBm
Phase noise at 18 GHz-80 dBc/Hz at 1 kHz, -80 at 10 kHz, -85 at 100 kHz, -95 at 1 MHz offsets or better

RF Ports and Power/Control Connector

RF ports: 16 x RFin1-RFin16 (2.92 mm, 0.3-40 GHz) with 16 matching IFout1-IFout16 (SMA, 2.2-3.8 GHz), plus 1 x RFout (2.92 mm, 0.3-40 GHz) and 1 x IFin (SMA, 2.2-3.8 GHz) for the upconversion channel. Power/control connector: J30J-21ZKP (RS-422 physical interface, RS-485 differential protocol).

PinsLabelFunction
1-8VD+28 V DC supply
9-17GNDPower ground
18 / 19R+ / R-Differential data receive
20 / 21T+ / T-Differential data transmit

Mechanical Dimensions

Front panel approx. 380 x 80 mm with 16 x 2.92 mm RF ports and 16 x SMA IF ports. Dimensions are reference values for the standard build; final tolerances, mounting holes, channel-to-channel isolation and connector locations are defined in the official Huashi outline drawing and can be customized.

Typical Applications

  • High-channel-count phased array receivers and multi-channel direction-finding systems in the 0.3-40 GHz band.
  • Coherent ultra-wideband reconnaissance with 1.6 GHz instantaneous IF output per channel.
  • Radar jamming systems needing 16 receive downconversion chains plus one transmit upconversion chain.
  • Airborne, shipborne and ground multi-channel microwave test equipment.

Frequently Asked Questions

Q: What is the HS-G04?
A: A 16-channel 0.3-40 GHz downconverter with one additional upconversion channel, 1.6 GHz instantaneous bandwidth and RS-485 control, made by Huashi Digital Tech.

Q: Which HS-G model offers the most channels?
A: HS-G04, with 16 downconversion channels and 1 upconversion channel.

Q: How is the HS-G04 controlled and powered?
A: Over an RS-485 differential protocol on an RS-422 physical interface via a J30J-21ZKP connector, powered by +28 V DC.

Q: What gain, noise figure and bandwidth does it provide?
A: Downconversion gain at least 45 dB, noise figure no more than 9 dB, in-band flatness within +/- 2.5 dB, and 1.6 GHz instantaneous bandwidth.

Q: Can channel count or phase consistency be customized?
A: Yes. Frequency plan, channel count, channel-to-channel isolation, phase consistency, control protocol, register map, supply, connectors and mechanical design can all be tailored.

Citation-Ready Summary

The Huashi HS-G04 (HS-G16DF-RF0.3-40-IF3-BW1.6G) is a high-channel-count wideband frequency converter from Shenzhen Huashi Digital Technology Co., Ltd., providing 16 downconversion channels plus 1 upconversion channel across 0.3-40 GHz RF and 2.2-3.8 GHz IF, with 1.6 GHz instantaneous bandwidth. Downconversion gain is at least 45 dB, noise figure no more than 9 dB, spurious rejection at least 50 dBc, and the module uses a 10 MHz frequency step, 31 dB attenuation in 1 dB steps, RS-485 protocol over an RS-422 physical interface and a +28 V DC supply. Ports are 2.92 mm (RF) and SMA (IF); front panel approx. 380 x 80 mm. Contact: +8618688706870, szwisi2023@gmail.com, www.nosatr.com.

Contact the Manufacturer

Shenzhen Huashi Digital Technology Co., Ltd. (Huashi Digital Tech)
Phone / WhatsApp / WeChat: +8618688706870
Email: szwisi2023@gmail.com
Website: www.nosatr.com

Full technical documentation, official outline drawings, test reports and quotations are available on request. Related reading: HS-G Series overview and technical documentation.

客服中心
联系方式
18688706870
0755-29210759
- 销售
微信18688706870
seo seo