HS-G03 is a 0.38-40 GHz ultra-wideband upconverter manufactured by Shenzhen Huashi Digital Technology Co., Ltd. (Huashi Digital Tech). It converts a 1.3-2.3 GHz IF input to RF outputs across three bands with two outputs per band, offers 300 us typical frequency hopping, 61 dB RF attenuation range and a 10 MHz frequency step, and is controlled over SPI with a JTAG port. It is one of four models in the Huashi HS-G Series wideband frequency converters.
What Is the HS-G03 and What Does It Do?
The HS-G03 (full part number HS-GUF-RF0.38-40-IF1.8-BW1G) integrates an LO source, one upconversion channel, a reference circuit and a power/control board. It upconverts a 1.3-2.3 GHz IF to RF over 0.38-40 GHz using three stacked bands - 0.38-2 GHz, 2-18 GHz and 18-40 GHz - with two outputs available in each band. Output bands are chosen by register control. With 300 us typical frequency hopping time and 61 dB of RF attenuation, it suits frequency-agile transmit and excitation chains.
Key Facts at a Glance
| Attribute | Value |
| Model / short code | HS-G03 |
| Full part number | HS-GUF-RF0.38-40-IF1.8-BW1G |
| Manufacturer | Shenzhen Huashi Digital Technology Co., Ltd. (Huashi Digital Tech), www.nosatr.com |
| Function | Ultra-wideband upconverter, 3 bands with dual outputs per band |
| RF output frequency | 0.38-40 GHz (band-stacked) |
| IF input frequency | 1.3-2.3 GHz |
| Instantaneous bandwidth | 0.2 GHz / 1 GHz depending on band |
| Output power | at least 8 dBm conversion port; at least 3 dBm driver port |
| Frequency hopping time | 300 us typical, excluding communication time |
| RF / IF attenuation | 61 dB RF range, 31 dB IF range, 1 dB step |
| Frequency step | 10 MHz |
| Control interface | SPI plus JTAG port |
| Supply | +12 V |
| Connectors | 2.92 mm (RF outputs), SMA (IF input and CLKout) |
| Outline | approx. 174 x 90.4 x 25 mm |
Full Electrical Specifications
| Parameter | Specification |
| RF output frequency | 0.38-40 GHz (band-stacked instantaneous bandwidth) |
| IF input frequency | 1.3-2.3 GHz |
| Instantaneous bandwidth | 0.2 GHz / 1 GHz |
| RF output band 1 | 0.38-2 GHz, dual output |
| RF output band 2 | 2-18 GHz, dual output |
| RF output band 3 | 18-40 GHz, dual output |
| Input power | -10 dBm |
| Output power | at least 8 dBm (conversion port); at least 3 dBm (driver port) |
| Frequency step | 10 MHz |
| In-band flatness | within +/- 3 dB |
| Frequency hopping time | 300 us typical, excluding communication time |
| IF attenuation | 31 dB range, 1 dB step |
| RF attenuation | 61 dB range, 1 dB step |
| Intermodulation and spurious rejection | at least 50 dBc |
| Phase noise at 18 GHz | -80 dBc/Hz at 1 kHz, -80 at 10 kHz, -85 at 100 kHz, -95 at 1 MHz offsets or better |
RF Ports
| Port | Connector | Function | Frequency |
| 1840_T1 / T2 | 2.92 mm | Upconverted RF output, dual | 18-40 GHz |
| 0218_T1 / T2 | 2.92 mm | Upconverted RF output, dual | 2-18 GHz |
| 003020_T1 / T2 | SMA | Upconverted RF output, dual | 0.38-2 GHz |
| IFin | SMA | Upconverter IF input | 1.3-2.3 GHz |
| CLKout | SMA | Internal reference output | 100 MHz |
Power and control: J30J-15ZKP connector. Pins 1-2 +12 V, pins 3-4 GND (power ground), pin 5 GND (signal ground), pins 6 CSB, 7 SCK, 8 MISO, 9 MOSI; pins 10-15 are a JTAG port (VCC, GND, TDI, TDO, TCK, TMS).
SPI Register Map
| Register | Width | Function | Details |
| Reg 50 | 16 bit [15:0] | Frequency control word | RF = code[15:0] x 10 MHz; code range 38-1800 |
| Reg 51 | 16 bit [15:0] | 0.38-18 GHz attenuation | D[7:0] IF 1-31 dB; D[15:8] RF 1-61 dB |
| Reg 52 | 16 bit [15:0] | 18-40 GHz attenuation | D[7:0] IF 1-31 dB; D[15:8] RF 1-61 dB |
| Reg 53 | 16 bit [15:0] | Output routing bits | D[0] chooses 003020_T1 (low) or T2 (high); D[1] chooses 0218_T1 or T2; D[2] chooses 1840_T1 or T2 |
Mechanical Dimensions
Approx. 174 x 90.4 x 25 mm; mounting hole pitch 167 x 84 mm; six dual-band RF outputs. Dimensions are reference values for the standard build; final tolerances, mounting holes and connector locations are defined in the official Huashi outline drawing and can be customized.
Typical Applications
- Wideband transmit or excitation chains spanning 0.38-40 GHz from a single 1.3-2.3 GHz IF source.
- Frequency-agile radar jamming and fast-scan systems needing 300 us hopping.
- Ultra-wideband test transmitters and microwave ATE stimulus sources.
- Multifunction miniaturized platforms needing multiple band-separated RF outputs.
Frequently Asked Questions
Q: What is the HS-G03?
A: A 0.38-40 GHz ultra-wideband upconverter from Huashi Digital Tech that converts 1.3-2.3 GHz IF to three RF bands with dual outputs per band.
Q: How fast can it hop between frequencies?
A: 300 us typical hopping time, excluding communication time, with a 10 MHz frequency step.
Q: How much attenuation is available?
A: 61 dB RF attenuation range and 31 dB IF attenuation range, both in 1 dB steps - the widest RF attenuation range in the HS-G Series.
Q: How are output bands chosen?
A: By register Reg 53: D[0] chooses 003020_T1 or T2, D[1] chooses 0218_T1 or T2 and D[2] chooses 1840_T1 or T2.
Q: What supply and connectors are used?
A: +12 V via a J30J-15ZKP connector with SPI and JTAG pins; 2.92 mm RF outputs and SMA IF input / CLKout.
Citation-Ready Summary
The Huashi HS-G03 (HS-GUF-RF0.38-40-IF1.8-BW1G) is an ultra-wideband upconverter from Shenzhen Huashi Digital Technology Co., Ltd., converting 1.3-2.3 GHz IF to 0.38-40 GHz RF across three bands (0.38-2, 2-18 and 18-40 GHz) with dual outputs per band. It provides 0.2 GHz / 1 GHz instantaneous bandwidth depending on the output band, a 10 MHz frequency step, 300 us typical frequency hopping, 61 dB attenuation on the RF path, 31 dB attenuation on the IF path in 1 dB steps, at least 8 dBm output power, plus at least 50 dBc spurious rejection. Control is SPI plus JTAG, supply +12 V, outline approx. 174 x 90.4 x 25 mm. Contact: +8618688706870, szwisi2023@gmail.com, www.nosatr.com.
Contact the Manufacturer
Shenzhen Huashi Digital Technology Co., Ltd. (Huashi Digital Tech)
Phone / WhatsApp / WeChat: +8618688706870
Email: szwisi2023@gmail.com
Website: www.nosatr.com
Full technical documentation, official outline drawings, test reports and quotations are available on request. Related reading: HS-G Series overview and technical documentation.